No.	Item No./Description	Order Code
	Interface board IF 1
2.1	IF 1 with analog output Optically isolated, 4 .. 20 mA (other ranges specified 0 .. 20 mA or 0 .. 24 mA)	IF 1-AI
2.2	IF 1 with RS 232 Optically isolated, can be combined with option IF 1-AI option	IF 1-RS 232
2.3	IF 1 with RS 422/485 Optically isolated, can be combined with option IF 1-AI option	IF 1-RS 422
2.4	Interface board IF 2 built in to VLM 200, incl. additional connection socket with plug, 2 programmable optically isolated pulse outputs, each with two phases, passive NPN transistor, frequency 0.4 Hz-25 kHz, resolution 20 ns)	IF2
2.5	Interface board IF 2F/422 built in to VLM 200, incl. additional connection socket with plug, 2 programmable optically isolated pulse outputs, each with two phases, RS422-driver, frequency 0.4 Hz - 500 kHz, resolution 20 ns	IF 2F/422
2.6	Interface board IF 2F/5V (built in to VLM 200, incl. additional connection socket with plug, 2 programmable optically isolated pulse outputs, each with two phases and inverted signals, 5 V driver, frequency 0.4 Hz - 500 kHz, resolution 20 ns	IF 2F/5V
2.7	Option for Interface board IF 2, IF2F IF2 card with analog output 16 bit as additional component version, optically isolated, 4-20 mA (please specify other ranges 0-20 mA or 0-24 mA)	IF 2/AI
2.8	Interface board IF 2/PP built in to VLM 200, incl. additional connection socket with plug, 2 programmable optically isolated pulse outputs, frequency 0.4 Hz-50 kHz, 7 balanced drivers with +/- 100 mA per output, external power supply +15 to 30 Volt; A2, /A2, B2, /B2, A3, and B3 pulse outputs and OUT3 status output	IF 2F/PP
2.9	Interface board IFETHER built in to VLM 200, incl. connection socket with plug with 5 m patch cable RJ45, output measuring rates over Ethernet, TCP/IP, UDP/IP and Telnet	IFETHER
2.10	Connection board ABETHER built in to VLM 200 instead of AB 1, incl. connection socket and 5 m patch cable RJ45 VLM 200 programming over Telnet and output of measuring rates over TCP/IP, UDP/IP and Telnet (If new device without AB 1 wth extra discount)	ABETHER
2.11	ECC 2 shaft encoder controller slot card controller for connection of a encoder, measurement as of 0 m/s, directional identification from the shaft encoder signal; built in to VLM 200, incl. additional connection socket with plug	ECC2
2.12	Option RS 422/485 for ECC 2 shaft encoder controller slot card ECC 2 with RS 422 / RS 485, optically isolated	ECC2-RS 422
2.13	Option RS 232 for ECC 2 shaft encoder controller slot card ECC 2 with RS 232, optically isolated	ECC2-RS 232
2.14	Interface board IF-PROFI for Profibus DP for VLM 200 firmware version 6.7, binary data at the Profibus, different modes, min actualisation time 10 ms, delivery incl. special connection sockets and two standardised circular connectors	IFPROFI
2.15	Automatic directional detector built in to VLM 200, retrofit possible, cannot be combined with F- and S-series	DIR
2.16	Real time clock RTC date and time, built in to VLM 200, retrofit not possible	RTC
2.17	Power supply 24 Volt / DC built in to VLM 200, retrofit not possible	24DC
2.18	Additional connection socket with plug built in to VLM 200, 5-pole, for device connections 4 and 5, 1-2 pieces are possible	CONPG9
2.19	Additional filter board FB1 Please specify velocity ranges, range depends on VLM200 - type and setting of DIRECTION parameter!	FB1
2.20	PC-Software VLMTOOL Convenient parameter setting and device administration including graphic online output with protocol, designed for Windows 98/NT/2000/XP	VLMTOOL

Notes: Only one Interface board can be plugged in; for the IF 1 interface card and ECC2 controller slot card RS 232 option can not be combined with the RS 422 option! An analog output is not available for IF 2/PP!

No.	Item No./Description	Order Code
3.1	Spare lamp for VLM 200 valid from October 1996	LM6H10W
3.2	Spare lamp for VLM 200 valid until September 1996	LB6H10W
3.3	Spare lamp for LI 20	LM12H20W
3.4	Spare lamp for LI 35	LS12H35W
3.5	Spare window OW 2 for VLM 200 and LI 20	OW 2
3.6	Spare window OW 3 for VLM 200 H lighting window and LI 35	OW 3
3.7	Spare window OW 4 for VLM 200 H lens window	OW 4
3.8	External lighting LI 35 IP 65 casing, power supply 230V/AC, 35 W halogen lamp LS12H35W, incl. mains cable; please order spare lamp LS12H35W / LI 35 at the same time	LI 35

No.	Item No./Description	Order Code
5.1	Comfortable counter/display PAXI for switchboard mounting; 85-250 V/AC RS 485 and optional RS 232 for display VLM 200 measuring rate, two switching outputs, display red, programmed for VLM 200 connection	PAXI / RS485 bzw. PAXI / RS232
5.2	Comfortable Counter/display PAXICA built in to IP65 steel casing data as PAXI, all connections can be screwed, incl. all connection cables, short documentation	PAXICA / RS485 bzw. PAXICA / RS232
5.5	Digital display for analog signals PAXD for switchboard mounting; 85-250 V/AC; input 0/4 to 20 mA, display red, programmed for VLM 200 connection (display of measurement rate 0..100 at 4..20 mA analog signal)	PAXD
5.6	Digital display for analog signals IP65 PAXDCA built in to IP65 steel case; data as PAXD, all connections can be screwed, incl. signal connector, power cable and wiring documentation	PAXDCA
5.7	Analog current meter ACM aluminum housing, IP52; analogue current meter 4..20 mA, displays 0..100 %, incl. 5 m connection cable	ACM

No.	Item No./Description	Order Code
6.1	Mounting plate MP 3 with long holes for z-direction, upgrade to MP 3R possible	MP 3
6.2	Mounting plate MP 3R with long holes for z-direction and rotation, incl. MP 3 and rotation plate	MP 3R
6.3	Set of vibration absorbers for VLM 200 4 x M6 hole on M6 thread, incl. 4 x M6 screws, 20 mm higth	ELM4
6.4	Air jet unit PA 2 with ¼ ´´ connection thread, protection against dry dust, mounted on the VLM 200; cannot be combined with LA option; tempered, clean compressed air required	PA 2
6.5	Linear unit LJ 1b for device adjustment Y-direction or Z-direction incl. adapter plate for VLM 200, can be used optionally for X-direction, 30 cm procedural distance, other lengths on request	LJ 1b
6.6	Linear unit LJ 2b for device adjustment Y- and Z-direction incl. adapter plate for VLM 200, 30 cm procedural distance each, other lengths on request	LJ 2b
6.8	Cooling and protection case CB 5 for VLM 200 for rolling mill applications, cover has all-around seal, high-grade steel/ stainless; tempered, clean air required, not for L-series, design for 70 mm hose diameter; delivery incl. TB4 or TB5	CB 5
6.9	Protection nozzle TB 4 for CB 5 Protection against oil, water, dust and steam; tempered, clean air required, high-grade steel/stainless, please specify the working distance xxx of VLM 200!	TB 4 / xxx (xxx = 185, 240, 330)
6.10	Protection nozzle TB 5 for CB 5 Protection against oil, water and dust; tempered, clean air required, high-grade steel/stainless, short length, please specify the working distance xxx of VLM 200!	TB 5 / xxx (xxx = 185, 240, 330)
6.11	Air supply and connection case AC 5 for CB 5, delivery includes 5 m air hose and cable for VLM 200, design for 70 mm hose diameter	AC 5
6.12	Air hose, length 5 m, diameter 70 mm Plastic air hose 70 mm, for connection AC4 to CB4b, delivery incl. customised cables to the VLM 200; extra charge per meter, until maximum length 15 m	ATP 4 / 70
6.13	Metal air hose, length 5 m, diameter 70 mm Metal air hose 70 mm, for connection AC4 to the CB4b, delivery incl. customised cables to the VLM 200; extra charge per meter, until maximum length 15 m	ATM 4 / 70
6.14	Viton air hose, length 5 m, diameter 70 mm Viton air hose 70 mm, for connection AC4 to the CB4b, delivery incl. customised cables to the VLM 200; extra charge per meter, until maximum length 15 m	ATV 4 / 70

Explanation: open, i.e. with end splices

No.	Item No./Description	Order Code
9.1	NF-signal cable 5 wires, price per meter PUR signal cable, 5x 0,25mm², screened, Ø 5,2 mm	PUR5S
9.2	NF-signal cable 8 wires, price per meter PUR signal cable, 8x 0,25mm², screened, Ø 6,2 mm	PUR8S
9.3	HF-signal cable, price per meter twisted pair wires, screened, Ø 6,2 mm, recommended for IF 2 F/422 and analogue output	HF4S
9.4	Resistor 1.2k for rack mounting	RH1.2
9.5	Resistor 1.2k with red LED for rack mounting	RHLEDr1.2
9.6	Resistor 1.2k with green LED for rack mounting	RHLEDg1.2
9.7	Resistor 120 Ohm for rack mounting recommended for IF 2F/422	RH120
9.8	Measurement-resistor 500 Ohm / 0,1%	RS500
9.9	Tool for adjustment of working distance for VLM 200 L - series 170 mm aluminum tube	WD170 / VLM2
9.10	Tool for adjustment of working distance for VLM 200 A standard - series 185 mm aluminum tube	WD185 / VLM2
9.11	Tool for adjustment of working distance for VLM 200 D - series 240 mm aluminum tube	WD240 / VLM2
9.12	Tool for adjustment of working distance for VLM 200 H - series 330 mm aluminum tube	WD330 / VLM2
9.13	Converter RS 422 to two phases to TTL for IF2F/422; rack mounting; output signal A, /A, B, /B; 24 Volt power supply; up to 500 kHz, output TTL 5V/24 mA	WAN422
9.14	Profibus Gateway Unigate/VLM2 for VLM 200 series, rail mounting, power supply 24 V, RS232/RS485 to Profibus DP, different output modes	Unigate / VLM2
9.15	Impulse transformer TR1701 for A/B signals up to 200 kHz, 5 or 24 V level input and output, opto isolated, rail mounting, power supply 24 V	TR1701
9.16	Pulse divider TR1701/P1 for A/B signals up to 200 kHz, 5 or 24 V level, opto isolated, dividing relation can set to 1 up to 64	TR1701/P1
9.17	Gateway RS232-RS422 opto isolated, rail mounting, power supply 24 V	CON232/422
9.18	S-Interface for VLM 200 S Series generation of the synchronization trigger signal for S-Series for difference measurement applications; allows easy connection of 2 up to 3 gauges of the VLM 200 S-Series to a PLC; rail mounting, power supply 24 V	S-Interface

	You can find information about the VLM 200 Series on the side Measurement Gauge VLM 200.
	Visit the side VLM 200 Applications. You can download application briefs written in different languages.
	You can find a short overview of the gauges of the VLM 200 Series. You can download Data Sheets.
	You need a sollution for your measurement task? Please contact us: e-mail or phone.
	Do not hesitate to contact us for further information via e-mail or FAX
	Inside the Download Area yon can find the user manual as PDF file. Or download the Windows-Programme "VLMTERM" (freeware).

© ASTECH GmbH 2012 - Imprint   phone +49(0)381/44073-0