Filter section:
- Bulk solid silo
- Cement storage
- Coil lines, Inspection lines
- Coil storage
- Coiling machines
- Container ports
- Conveyor belt
- Decapper
- Engineering
- Extruder
- Filling plant
- Final assembly
- Finishing, Slitting line, Winder
- Finishing, Slitting lines
- Flying saw
- Forge hammer
- Gantry cranes
- Hot objects
- Laboratory
- Packing
- Ports, docking systems
- Printing machine, banderoling machine, register control
- Quality assurance
- Railway, Transportation
- Research and Development
- Service, Commissioning, Research
- Skin pass level, degree of stretching, mass flow
- Slitting shears
- Steel billets
- Tube inspection lines
Filter task:
- Abrasion measurement
- Coating inspection
- Coating inspection of foam material
- Collision avoidance
- Color inspection
- Color mark detection
- Color measurement of salmon meat
- Control of shears
- Distance measurement
- Egg yolk color classification
- Fill level measurement
- Length measurement
- Measurement of impact energy
- Mobile velocity and length measurement
- PET preform inspection
- Position detection
- Positioning of containers in gantry cranes
- Presence check
- Print mark detection
- Sandwich counter
- Velocity Measurement
- Velocity measurement, Length measurement
Filter measured variable:
- Acceleration (VLM)
- Color (CR)
- Degree of stretching and Skin pass level (VLM)
- Diameter (LDM)
- Distance (LDM)
- Fill level (LDM)
- Impact energy (VLM)
- Length (LDM)
- Length (VLM)
- Position (CR)
- Position (LDM)
- Position (VLM)
- Position detection (CR)
- Presence (CR)
- Presence (LDM)
- Quantity (CR)
- Thickness (LDM)
- Velocity (VLM)
- Velocity 1 (LDM)
- Velocity 2 (LDM)
- Width (LDM)
Task:
Control of shears
Areas:
Extruder
Measured Variables:
Velocity (VLM)
Length (VLM)
Control of shears
Areas:
Extruder
Measured Variables:
Velocity (VLM)
Length (VLM)
Description:
Ceramic material for the production of catalyser bodies is extruded at a velocity of between 0.5 m/min and 10 m/min. Cutting is done by a flying saw. The VLM measuring device provides the shear control with velocity and length values. Contact-free measurement eliminates damage to material (such as crushing the soft ceramics). The measurement is not affected by humidity or a water film on the surface of the material.
Products: VLM500, VLM502
Ceramic material for the production of catalyser bodies is extruded at a velocity of between 0.5 m/min and 10 m/min. Cutting is done by a flying saw. The VLM measuring device provides the shear control with velocity and length values. Contact-free measurement eliminates damage to material (such as crushing the soft ceramics). The measurement is not affected by humidity or a water film on the surface of the material.
Products: VLM500, VLM502
