Filter section:
- Bulk solid silo
- Cement storage
- Coil lines, Inspection lines
- Coil storage
- Coiling machines
- Container ports
- Conveyor belt
- Decapper
- Engineering
- Extruder
- Filling plant
- Final assembly
- Finishing, Slitting line, Winder
- Finishing, Slitting lines
- Flying saw
- Forge hammer
- Gantry cranes
- Hot objects
- Laboratory
- Packing
- Ports, docking systems
- Printing machine, banderoling machine, register control
- Quality assurance
- Railway, Transportation
- Research and Development
- Service, Commissioning, Research
- Skin pass level, degree of stretching, mass flow
- Slitting shears
- Steel billets
- Tube inspection lines
Filter task:
- Abrasion measurement
- Coating inspection
- Coating inspection of foam material
- Collision avoidance
- Color inspection
- Color mark detection
- Color measurement of salmon meat
- Control of shears
- Distance measurement
- Egg yolk color classification
- Fill level measurement
- Length measurement
- Measurement of impact energy
- Mobile velocity and length measurement
- PET preform inspection
- Position detection
- Positioning of containers in gantry cranes
- Presence check
- Print mark detection
- Sandwich counter
- Velocity Measurement
- Velocity measurement, Length measurement
Filter measured variable:
- Acceleration (VLM)
- Color (CR)
- Degree of stretching and Skin pass level (VLM)
- Diameter (LDM)
- Distance (LDM)
- Fill level (LDM)
- Impact energy (VLM)
- Length (LDM)
- Length (VLM)
- Position (CR)
- Position (LDM)
- Position (VLM)
- Position detection (CR)
- Presence (CR)
- Presence (LDM)
- Quantity (CR)
- Thickness (LDM)
- Velocity (VLM)
- Velocity 1 (LDM)
- Velocity 2 (LDM)
- Width (LDM)
Task:
Velocity Measurement
Areas:
Flying saw
Measured Variables:
Velocity (VLM)
Velocity Measurement
Areas:
Flying saw
Measured Variables:
Velocity (VLM)
Description:
Wire rod with a diameter of between 10 and 18mm is cut in motion with a flying saw according to customers’ specifications. The 0.1% accurate measurement of velocity performed by the VLM device ensures synchronous movement between the saw and the wire rod. Damage or early wear by measurements that are subject to slip can thus be avoided. Velocities of between 20 m/min and 60m/min are applied. Shiny, oiled or dry surfaces are detected in a reliable way.
Products: VLM500, VLM502
Wire rod with a diameter of between 10 and 18mm is cut in motion with a flying saw according to customers’ specifications. The 0.1% accurate measurement of velocity performed by the VLM device ensures synchronous movement between the saw and the wire rod. Damage or early wear by measurements that are subject to slip can thus be avoided. Velocities of between 20 m/min and 60m/min are applied. Shiny, oiled or dry surfaces are detected in a reliable way.
Products: VLM500, VLM502
